February 2016
    M T W T F S S
    « Jan    

Makita 18V LXT Li-Ion Cordless 10 oz. Caulk and Adhesive Gun Kit LXGC011

October 25, 2013

No Background Check Needed

18V LXT Li-Ion Cordless 10 oz. Caulk and Adhesive Gun Kit LXGC011

Even under the current administration, their will be no waiting nor background check with the Makita 18 Volt 10 Ounce Caulk and Adhesive LXT Li-ion Cordless Gun LXGC011. Included in this sweet deal is an 18V LXT Lithium-Ion Cordless  10 oz. Caulk and Adhesive Gun (LXGC01Z), an 18V LXT Battery (BL1830), a 30-Minute Rapid Optimum Charger DC18RC, a Holder (454275-7), a Holder Joint (454223-6), a Piston A Cartridge (142071-2), a Rod (142041-1), and a Makita blue, logo tool bag, to keep it all together with. Phew, that was a mouth full! Much easier read than said. Continue reading “Makita 18V LXT Li-Ion Cordless 10 oz. Caulk and Adhesive Gun Kit LXGC011” »

Bosch 11317EVS 3/4″ Hex Demolition Hammer

October 24, 2013


 Hardest Working Tool on the Worksite

The Bosch 11317EVS 3/4″ Hex Demolition Hammer runs on a high  amperage of 12.8, which makes the impact energy hard hitting with  4.0 – 16.5′ pounds. Outfitted with a no load BPM of 850 – 1,800 and a 120 volt rating, this demo hammer punches through the toughest materials. With a length of only 22.0″, this demo hammer has all the power you need without wearing the operator down by exposing him to the unnecessary fatigue associated with having to manipulate a bulky frame.

Variable Speed with Constant Response

Bosch 11317EVS 3/4" Hex Demolition Hammer

The Bosch 11317EVS 3/4″ Hex Demolition Hammer has several features developed and built into it that offer the operator the very best experience possible. One such feature, is that the variable speed dial is included for superior controlled chipping applications. In addition, the constant response circuitry easily provides a smooth soft-start, as it amazingly maintains constant speed under load, which also provides overload protection. A service reminder light indicates when the demo hammers  preventative maintenance is required. Another great feature is the inclusion of a padded rear handle, which absorbs the hammers shock, meaning your body does not, ultimately precluding the operator from unnecessary wear and tear on their body. Additionally, the 360-degree auxiliary handle provides a wide range of movement, which allows you to perform your many applications as it delivers  operator comfort. Finally, this demo hammer is double insulated, UL listed, and Bosch has constructed it to completely comply with OSHA’s strict codes and regulations. Continue reading “Bosch 11317EVS 3/4″ Hex Demolition Hammer” »

Pacific Laser Systems PLS1 Laser Distance Measurement Tool

October 23, 2013

 Laser Measurer General Info

Pacific Laser Systems PLS1 Laser Distance Measurement Tool

There are several differing measurements a laser measurer can do that are close to impossible to accomplish through traditional means. The application most commonly utilized is to measure between two walls, columns, or posts. To accomplish this the tool is placed against one wall, while the dot is aimed at the opposite wall. When the button on the measurer is pressed, the distance is displayed in your desired measurement either inches, feet or metrics.

Not all Measurers are Constructed Equally

When choosing a specific laser measurer look for what type of measurements you will be making in your daily application, many laser measurers can be highly sophisticated, while others are far more simplified in their tasks. The Pacific laser Systems PLS1 Laser Distance Measurement Tool has everything you could possibly desire, with a solid quality construction as well as the ability to take accurate readings. the PLS1 Laser has a 29 10 measurement memory storing your measurements for future use. This feature comes is particularly handy for cutting studs for a sloped wall. With area and volume capabilities it quickly measure square footage and cubic footage. In addition, it also measures Pythagoras, specifically used when you do not have a top surface to shoot to. The Pacific Laser system PLS1 has a minimum and maximum measuring mode, used to measure room diagonals as well as horizontal distances, all while it displays measurements in feet and inches.. Included is a distance measurer, a carrying case, and two AAA batteries.


Ridgid 36813 micro LM-400 Laser Distance Meter

October 22, 2013

I Can See Clearly Now

Ridgid 36813 micro LM-400 Laser Distance Meter

Many times great products with amazing capabilities and features miss the mark simply because the designers forget to make it easy to use and making the learning curve too steep. That being said, the Ridgid 36813 micro LM-400 Laser Distance Meter, clearly avoids that pitfall as this meter is built with a screen located on the front of the tool that allows users to clearly view measurements on it’s large, backlit, 4-line display screen. This one simple addition of a large screen with large print makes all the difference when talking about a product that is user friendly. Plus, the Ridged 36813 is packed with a fist full of features, including inclination angle measurements, which allows indirect measurements for hard to reach areas with the ability to self adjust and instantly convert your measurements to the desired calculations. These calculations include the ability to measure or convert  inches, feet, or meters. Another modern addition is the Bluetooth feature that offers a connection to smartphones and tablets to view, store, and share data instantly. The device also hooks up to Android and iOS Apps to overlay measurements onto a photo or sketch…. pretty freakin’ cool, right?! Continue reading “Ridgid 36813 micro LM-400 Laser Distance Meter” »

Bosch OS50VC 1/2-Sheet Orbital Finishing Sander

October 21, 2013

Finish it All in Style and Ease

Bosch OS50VC 1/2-Sheet Orbital Finishing Sander

Bosch OS50VC 1/2-Sheet Orbital Finishing Sander

Professionals and do it yourselfer’s alike can rejoice with the introduction of the new high end Bosch OS50VC 1/2-Sheet Orbital Finishing Sander. Finish all of your projects and more with ease, as well as a beautiful and stylish finish that will delight your clientele. That being said the Bosch OS50VC is a great value that comes loaded with a microfilter dust canister, a vac hose adapter, an auxiliary handle, a sanding pad, a punch plate, and even an additional sanding sheet to help get you rolling.

Heavenly Features

The Bosch OS50VC 1/2-Sheet Orbital Finishing Sander is so nice, that you may find yourself wanting to spend more time with it than your wife of over 10 years. That’s because it includes features such as a Bosch exclusive Vibration Control suspension system, which is designed to minimize tool vibration, for the ultimate in superior handling, which ultimately boils down to offering the operator maximum comfort. Another cool feature is the SheetLoc Supreme Sandpaper Attachment System. This system pulls regular sandpaper flat and tight, meaning they will never crinkle or roll, under pressure. In addition, the Bosch sander has a high-performance Soft Micro-cellular Backing Pad, which is made to specifically conform to the  many contours required of a sander. Even more, because Bosch built the OS50VC with a rugged die-cast aluminum gear housing, this sander offers a longer tool life and the ability to eliminates arm tiring wobble and vibration. Finally, not one, but two dust collection systems are at work with the Microfilter Dust Canister that can use either a handy  integrated paper filter and screw-off cap, or even a  vacuum hose connection with airflow control.

Bosch 12V MAX Heated Jacket PSJ120

October 20, 2013

Better Late Than Never

First there was Milwaukee, who two years ago pioneered the way for heated apparel powered by cordless batteries. Then came Dewalt with this month’s launch of 12V/20V powered heated jackets and hoodies. Finally, and still only fashionably late to the party, is Bosch with the third entrant, and last this season, into the arena of battery powered fashion wear.

Bosch PSJ120S 12V Heated Jacket

Bosh’s family of 12V Max Heated Jackets all come with the jacket, a BHB120 Battery, and a Holster/Controller. In addition, each jacket has three quick warming heat zones, with two heat zones in the chest and one in the back. Each of the sensors will begin warming in a mere matter of minutes and is controlled by a three level heat controller that can be adjusted from low which is indicated with a blue light, medium which is indicated with a green light, all the way up to high which is indicated with a red light. Bosch offers these jackets in varying sizes including small, medium, large, XL, XXL, and XXL. Continue reading “Bosch 12V MAX Heated Jacket PSJ120” »

Makita 18V LXT Li-Ion Brushless Cordless 2-Piece Combo Kit XT248

October 19, 2013

Longer Run Time That Lasts and Lasts..

The Makita XT248 18V LXT Li-Ion Brushless Cordless 2-Piece Combo Kit has an efficient BL Brushless motor, that is made to be electronically controlled, and thus optimize the battery energy. In fact the battery energy has an overall 50% longer run time per charge , so just think of all the applications you can actually finish within just one charge?!  The Makita XT248 has a BL Brushless Motor which eliminates the necessity for carbon brushes, enables the tool to run smoother and cooler, and ultimately more efficiently, over it’s lengthened tool life. At the end of the day the Makita XT248 Kit is a product that lasts and lasts and lasts.

Extreme Protection For Your Makita Tool

 Built with a heavy construction exterior, Makita offers excellent protection in smart design, which Makita has so aptly named their Extreme Portection Technology or XPT. XPT is engineered to protect the device by providing increased dust and water resistance, ultimately offering the utmost quality for operating under harsh jobsite conditions. Continue reading “Makita 18V LXT Li-Ion Brushless Cordless 2-Piece Combo Kit XT248” »

Sumner 2416 Contractor Lift 784751

October 18, 2013

 Lifts your Projects to New Levels

Sumner 2416 Contractor Lift 784751

Go above and beyond all of your lifting applications with the Sumner 2416 Contractor’s Lift 784751! Built with a super compact body design that has the ability to lift pipe or heavy materials up to 17 feet, or even fork down 16 feet. Additionally, this lift has a duality in nature, as the Sumner lift is small enough to roll through and  fit between many warehouse isles with ease so that you can use the lift to pick products or complete construction applications. The one piece construction, means there is no set up and no loose pieces to deal with and lose.

Transports With Ease

The compact size also makes the Sumner Lift 2416 with an extremely portable design, meaning the lift can be operated by just one man. But this lift offers even more options, such as it’s ease of portability, allowing it to fit into most vans, including trucks and SUV’s. This lift is the perfect fit for not only small privately owned companies, but the larger corporation warehouses and industrial employers as well. The list of businesses and industries that might make a good home for this product, include; HVAC contractors, electrical contractors, industrial maintenance, and steel erectors. Continue reading “Sumner 2416 Contractor Lift 784751” »

Greenlee 6 Ton Open Center Hydraulic Cutting/Crimping Tool (Bare) LP6-01

October 17, 2013

Quick Changes


Greenlee 6 Ton Open Center Hydraulic Cutting/Crimping Tool (Bare) LP6-01

Wasting time on the site as you adjust and change parts in and out can be frustrating! The Greenlee LP6-01 6 Ton Open Center Hydraulic Cutting/Crimping Tool (Bare) is Greenlee’s answer to making quick changes happen, thanks in part to the new LP6-01′s spring loaded pin, which is the key in Greenlee’s design for creating a hydraulic crimping tool with the fastest change over jaws possible. In addition, the LP6-01 also includes interchangeable crimping and cutting jaws, that really allow it differentiate itself from competitor offerings, while also providing it with enhanced versatility and value.


Access Granted

Tight spaces, with little to no elbow room no longer stand a chance against Greenlee’s LP6-01! That’s because Greenlee’s 6 ton Open center hydraulic Cutting/Crimping Tool now has a more modern design with a smart 350° rotating head! The rotating head is useful in several problematic application scenarios, that professionals sometimes face. Continue reading “Greenlee 6 Ton Open Center Hydraulic Cutting/Crimping Tool (Bare) LP6-01” »

Milwaukee 2720-20 M18 FUEL SAWZALL Reciprocating Saw Tool Only

October 16, 2013

Improving On Perfection Yet again

Milwaukee 2720-20 Sawzall

How do you improve on perfection? Well the pioneer of the first Sawzall has been doing just that for many decades and does it yet again with the Milwaukee 2720-20 M18 FUEL SAWZALL Reciprocating Saw Tool Only. Remember when after years of multi-platinum success and a roster of number one hits that looked more like 50 cents rap sheet, Garth Brooks suddenly decided to don a wig and try to achieve commercial success as the alternative singer Chris Gaines? Is there anyone who knew what that was all about? The lesson here, is that it is hard to mess with a hit. That’s because that fan base you build when you win them over with that superior blend of characteristics that separates you from the everyone else, usually doesn’t take too kindly when you switch up the magic recipe. But that’s why Milwaukee has been able to offer continued improvement on perfection… It’s because they know not to mess with the magic recipe, while still leveraging improvements in cutting edge technology that has kept their Sawzall fresh, each and every year, for at least the last 75 years. So what’s new with the 2720-20?

The New And Improved

With their newest entrant, the Milwaukee 2720-20 M18 FUEL SAWZALL Reciprocating Saw Bare (Tool Only), Milwaukee has added superior performance and the fastest cutting speed in its class, as well as increased power and durability over that of corded competitors. That’s because Milwaukee has included their proprietary POWERSTATE brushless motor in the 2720-20, which supplies constant power to accomplish those faster cuts, all while reducing heat exposure and extending the life of this SAWZALL. In addition, constant annual innovations in their various RED technology, means that not only does Milwaukee offer one smart tool but also one that will keep running long after the other competitor’s wheels have come off. First, their REDLINK PLUS intelligence system provides optimized performance and overload protection using total system communication between tool, battery and charger. Second, their REDLITHIUM XC 4.0 battery pack provides superior pack construction, more work per charge and more work over the life of the battery pack than that offered by other competitive batteries. Continue reading “Milwaukee 2720-20 M18 FUEL SAWZALL Reciprocating Saw Tool Only” »