•  

    April 2014
    M T W T F S S
    « Jan    
     123456
    78910111213
    14151617181920
    21222324252627
    282930  

Ridgid 535A (pipe 1/2 – 2″) Automatic Threading Machine 84097 (2 Die Sets 1 Die Head Included)

June 5, 2013

 Built with a High Clearance Carriage and Self Centering Cutters

Ridgid 84097 535A (pipe 1/2 - 2") Automatic Threading Machine (2 Die Sets 1 Die Head Included)

 The Ridgid 84097 535A (pipe 1/2 – 2″) Automatic Threading Machine (2 Die Sets 1 Die Head Included) has been constructed with a high clearance carriage and can now be used in conjunction with the geared threader model 141. The Threader Machine also has a length gauge for quicker service and a rear centering device with capabilities of  automatic or centering only. The 535A Threading Machine’s cutters are  self-centering, as well as full-floating, which supports the operator in time management and makes cuts easier and faster than ever before.. The two models available are a standard 820 Wheel-Type Cutter, pipe capacity 1/8″ – 2″ 3mm-50mm, bolt capacity 1/4″ – 1″ or a  821 Blade-Type cutter, pipe capacity 1/2″ – 2″.

 Comes Complete with Dies, Die Head, and Reamer

The 535A Ridgid comes complete with several accessories to get the operator started such as; the 811A universal, quick-opening die head, a 341 reamer, an 820 cutter, a set of 1/2″ – 3/4″ universal high-speed dies, and a set of 1″ – 2″ universal high-speed dies. Plus, Ridgid throws in one gallon of  stainless steel premium oil, just to get your worksite threading asap. Two hex wrenches are also included, as well as a spare E-1032 cutter wheel.

A Two Horse Power Motor and 20 Amp Reversible Induction Motor

The Threading Machine 84097 is a powerhouse with a fantastic two horse power motor, along with 115Volts and  60 Hz. The Motor also runs on 20 amps, with a reversible induction motor and a spindle speed that has 3 speeds of 16, 46, and 58 RPM’s. In addition, Ridgid constructed the 535A with a reamer, that has a 5-Flute cone and a RH 1/8″ – 2″ for the 84097 model.

Enjoy a Generous oil Reserve, Top Cover and Chip Tray

Besides all the great amenities previously mentioned, the Ridgid 84097 535A Automatic Threading Machine also has an automatic chuck with four reversible forged jaws, a large 1.75 gallon oil reservoir, and it displays a 100% greater chip tray capacity, with a generous top cover area.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>